Weberwall Blokset Plus
Weber Blokset Plus is a high-grade non-refractory mortar consisting of high-performance polymers for bonding masonry units, like AAC blocks. It is a weber proprietary formulation of the blend of polymers, retainers, cement, mineral additives & graded sand to have excellent grip and adhesion strength between block to block.
Packaging
Bag Size:
- Supported on Wall.
- Very high tensile splitting strength.
Advantages
- Ready to mix
- Self curing
- Easy to use
- High tensile strength
- Good coverage
- High bond strength
- Wall cladding
- Crack free
- Single component product
- Imparts flexibility
- No shrinkage & leakage
- High durability
Features and Benefits
- For 2mm bed thickness
- Conforms to ASTM C-1600-10
- No pre-wetting of blocks required
- Very high tensile splitting strength (Bond strength)
- Environment-friendly
- Chiselling and conduiting can be carried out after 48 hours
- The plastering can be carried out after 24-48 hours
- No shrinkage and leakage
- No powdering on the specified thickness
- Can be applied with 80% material transfer
- Cost-effective as it is applied in less thickness, having superior coverage, reduction in wastage due to long pot-life, allows high-speed block mounting and no water curing required
About this Product
❄ Always clean the surface before application to remove any loose particles or laitance.
❄ Ensure that the surface is solid (hard and rigid) for the given application and free from voids, holes, and cracks.
❄ Pre-wetting of blocks. (Not required for weber blokset plus).
❄ Mix powder to water (as per mixing ratio) and blend to a smooth, workable stiff paste.
❄ Always add the powder to water.
❄ Allow the mix to stand for 2-3 min for the paste to mature.
❄ Do not add water to the already mix slurry to extend the pot life.
❄ Put well-mixed mortar on the block with the help of trowel spread mortar uniformly on the unit for the specified bed thickness.
❄ Firmly place the block with slight shear to ensure proper transfer and bonding.
❄ Mortar to be applied on the block and column and beam for good bonding at the joints.