Weberwall Joinsbond
Weberwall Joinsbond is a single component bonding agent, which is specially designed for providing high bonding strength between difficult to bond building elements. This eliminates the need for hacking surfaces to achieve bonding. Use it for achieving a strong bond between AAC blocks and high-grade RCC, or between plaster and bare AAC block walls.
Packaging
Bag Size:
5kg
- Supported on Wall.
- Use it for achieving a strong bond between AAC blocks and high-grade RCC, or between plaster and bare AAC block walls.
Advantages
- Easy to apply
- High grab
- Brush application
- Partition walls
Features and Benefits
- Using chemical bonding, provides mechanical key for further usage
- Designed to achieve high bonding strength with concrete up to M60 grade
- Achieves high bonding between the columns and AAC block walls, to prevent debonding and cracking
- Applying on AAC block walls, before plastering will enhance the life of plaster, and reduce the possibilities of debonding and cracking
- Saturate the surface well and bring the surface to SSD condition, before application of Weberwall joinsbond
About this Product
- Gradually add 3 parts of Weberwall joinsbond to 2 parts of clean water (by volume)
- Mix it to a lump-free, smooth, brushable slurry using a suitable stirrer/low-speed drill mix/or any other appropriate tool
- After mixing, allow the material to stand for a minute for it to mature
Things to Consider
❄ Do not use for cracks more than 2 mm in width. Such huge cracks are indicative of structural issues, and should be checked by structural consultant.