Saint Gobain - Weberad Catalyzer
Weberad Catalizer is an accelerating additive for use weberdry PUR waterproofing membranes. It accelerates the weberdry PUR liquid-applied polyurethane waterproofing membranes allowing it to cure homogenously at a quicker rate, even at low temperatures, so an overcoating is possible within 3-5 hours.weberad cataliser enables the weberdry PUR polyurethane waterproofing membrane to be applied in any desirable thickness, without forming bubbles.
Packaging
Size (Metal Pails):
- Suitable for accelerating the drying of single pack polyurethane membranes when applied at a high film thickness.
- It can be used as an additive for the application of weberdry PUR liquid-applied polyurethane waterproofing membrane in combination with the weberdry PUR fabric in the wet-in-wet application method.
Advantages
- Liquid Applied
- Water Proofing
- High film thickness
- Simple application
Features and Benefits
Weberad cataliser is mainly used when weberdry PUR membranes, needs to be applied in very low temperatures or when it needs to be applied in combination with weberdry fabric in wet-in-wet application method (higher layer thickness in one application) weberad cataliser accelerates the weberdry PUR liquid-applied polyurethane waterproofing membranes waterproofing coating for
- Waterproofing of roofs.
- Waterproofing of balconies, terraces, and verandas.
- Waterproofing of wet areas (under-tile) in bathrooms, kitchens, balconies, auxiliary rooms, etc.
- Waterproofing of pedestrian and vehicular traffic decks.
- Waterproofing of green roofs, flowerbeds, planter boxes.
- Protection of polyurethane foam insulation.
- Waterproofing and protection of concrete constructions like bridge-decks, tunnels, stadium stands, car parks, etc.
Things to Consider
❄ The mixing of the components has to be effected very thoroughly, especially on the walls and bottom of the pail until the mixture becomes fully homogeneous.
❄ Make sure to use weberdry PUR liquid-applied polyurethane waterproofing membranes mixture, within the stipulated Pot Life.(concrete surface failure) (ASTM D 903).