Saint Gobain Weber Tile Adhesive - Weberset Premier
Weberset Premier is a polymer-modified, thin-set tile adhesive for ceramic tiles, in internal areas. It is suitable for both vertical (wall) and horizontal (floor) application, over the cementitious substrate. It is supplied as a dry-mix mortar, to which water needs to be added before application.
Packaging
Bag Size:
- We can use in Wall & Floor.
- Weberset Premier Adhesive for Fixing Ceramic Tiles, Terracotta, and Quarry Tiles of Regular Size.
Advantages
- Ready to mix
- Self Curing
- Easy to Use
- Good coverage
- High bond strength
- Single component product
- High compressive strength
- High durability
Features and Benefits
- Can be used in internal areas, for the floor as well as wall application.
- Low VOC - for healthy living.
- No hacking of the substrate is required to achieve the required bonding.
- Self-curing properties, which allow for no-hassle application with minimum labor.
- The free-flowing product makes it easier to mix and apply.
- No-sag formula: provides for hassle-free application on vertical walls, without any slippage.
- Very low shrinkage prevents de-bonding and gives longer life to tiles.
- Useful for bed thickness of 3 - 12 mm. May go up to 15 mm in a limited extent.
Things to Consider
❄ Do not use for large format tiles.
❄ Do not use for fixing vitrified tiles or stones.
❄ Do not use on the wet screed. The surface must be fully cured.
❄ Do not use for installing glass mosaic, glass tiles, or metal tiles. Use only weberset glass mosaic for fixing glass mosaics, and only weber epoxy adhesive for fixing glass and metal tiles.
❄ Do not use for wooden flooring, for insulating and soundproofing panels
❄ Do not use on waterproofing coat – If waterproofing is required, use webertec SBR and webertec crete for the same.
❄ Refer to the respective datasheets for details.