NCL Render 608 – HP
NCL Render known as stucco or plaster, is a coating applied to building surfaces. It provides a protective and decorative finish, improving aesthetics and durability with proper application, it forms a strong bond to the substrate, enhancing the overall strength and longevity to your structure.
Packaging
Package Size:
Coverage:
0.53 sft/ kg or 0.049 m2 per kg at an average thickness of 10 mm
- Suitable for interior & exterior applications
- Suitable to apply on fly ash bricks, clay bricks, AAC Blocks, concrete blocks.
- Any other cementitious substrates.
- For filling the cavity, holes and irregularities to level the surface.
Advantages
- Experience efficient and fast application with factory premixed composition
- Saving time and labor with high compressive
- Tensile & Flexural strength
- It ensures a robust and durable finish while minimizing shrinkage and hairline cracks
- Cost-effective and environmentally friendly
- Sustainable pre-mix for superfast construction
- Strong bonding, excellent workability.
Features and Benefits
- Labor and time-saving: Factory premixed material saves labor and time.
- Speedy workmanship: Enables rapid construction progress.
- High compressive strength: Ensures strong and durable structures.
- Good tensile strength: Resists tension and stretching forces.
- Excellent flexural strength: Withstands bending and loading stresses.
- Minimizes shrinkage: Reduces material contraction during curing.
- Reduces hairline cracks: Helps maintain smooth surfaces.
- Cost-effective and VOC-free: Economical choice with no harmful emissions.
About this Product
- Ensure that the wall’s surface should be free from dust, oil, grease, paints, loose foreign particles/materials, and curing agents which may affect adhesion.
- Proper hacking to be done on concrete.
- Wet the surface before application without leaving excess water.
- Before application proper wall plumbing measures are to be taken.
PRECAUTION!
❄ Keep out of reach of children.
❄ Keep in a dry place.
❄ Avoid inhalation of dust.
❄ If it comes in contact with eyes or you feel skin irritation, wash with plenty of plain water and consult a doctor.
Do's
❄ The level from base to the top layer should be properly horizontal.
❄ There should not be any gap between the joints of AAC Blocks.
❄ Bottom layer of AAC Block should be properly laid, so that no gaps should come in between otherwise the blocks would crack.
❄ The lentil should be placed after every 5 to 6 layers of AAC Blocks or 6 m length to avoid cracks. It should be placed on a complete block.
❄ Storage on dry and even surface to avoid damage and contact with moisture.
❄ Before application – wet the block.
❄ Use self curing block mortar with 3 to 4 mm thickness only and notching is mandatory.
❄ Use a tool like hacksaw or rotary cutter.
❄ Should rest on full block.
Don'ts
❄ Do not use a rich mortar mix as it tends to shrink & might crack.
❄ Do not flood the brick with water.
❄ Do not construct a wall without coping the beam.
❄ Do not stack the blocks in a haphazard manner or leave them exposed to rain or moisture.
❄ Do not use tools like hammer, chisel etc. to cut the block.